Revamp the Floor: DIY Guide for Peel and Stick Vinyl Plank Flooring

Peel-and-Stick Vinyl Plank Flooring

It’s a common belief that renovating the house requires large sums of money and a lot of time. Fortunately, that’s only a myth. Thousands of people around the world delay their renovation plans just because they are running short of money or are too busy to give time for it. This article is all about something that is considered a staple of modern living – flooring!

Are you sick of your creaking, worn-down wooden floor, or the crummy tiles of your crappy rental apartment? It’s time to say good-bye to your saggy flooring and say hello to a super-chic, easy-to-install, and inexpensive peel-and-stick vinyl plank flooring!

Peel-and-Stick Vinyl Plank Flooring

Peel-and-stick vinyl plank flooring comprises planks made up of solid vinyl or composite vinyl. A layer of adhesive material is applied on one side of the plank, which is then covered with a layer of paper for protection.

Introduction of vinyl planks has taken the market by storm due to the diverse options and styles they offer. You can get the look of marble, ceramic tiles, and hardwood floor in this single wondrous flooring material. The designs and textures on offer are nothing short of impressive. Although luxury vinyl flooring is gaining popularity, the peel-and-stick planks still remain the best choice if you’re getting your floors done on a budget.

As the name suggests, vinyl plank flooring is installed by simply “peeling and sticking”. The paper layer is peeled off from the adhesive and the plank is then stuck firmly on the ground as per the floor layout. The planks are pressed against the ground which has been cleaned and made even properly. The adhesive then bonds with the ground to make up durable flooring.

If the underlayment is uneven, grainy, bumpy, dusty, or damp, the peel-and-stick vinyl plank flooring won’t hold the ground and might look clumsy. The vinyl planks stuck on such floors can come loose after some time. Hence, underlayment is extremely crucial.

To increase the durability and bonding ability of the planks, strong adhesive materials are used. However, the stronger the glue, the higher the health risk associated with it. Glues can be toxic and give off fumes which can cause pollution.

A Great Temporary Flooring Option

Peel-and-stick vinyl plank flooring is an ideal flooring option for rental houses and apartments. Since you do not own the place, you won’t have the incentive to invest in permanent flooring, but that doesn’t mean you have to bear with rotten, ugly floors.

Vinyl planks can be installed in kitchens and bathrooms. They also provide a stylish look to your living room. Another major benefit is that you can easily remove them without ruining the floor underneath when you wish to install permanent floors or change houses.

How Long Do They Last?

Vinyl is a material which can be best described using three words: Strong, Durable, and Versatile. These floors are extremely reliable and long-lasting. You can install and forget about them for as long as a decade. Still, you might observe them fading over time. When the time comes for the replacement, you can reinstall new planks without any professional help. However, don’t forget to redo the underlayment and repair any holes or bumps on the subfloor. Another plus is the fact that laminates and hardwood flooring can be laid directly over the existing old vinyl flooring.

Step-By-Step DIY Installation Guide

Peel-and-Stick Vinyl plank flooring is hands down the easiest to install option of all. Due to the fast and smooth installation and removal process, they can be your next do-it-yourself venture!

Here’s our step-by-step guide for the installation of vinyl plank floors. Follow it and revamp your floor!

Floor Preparation

The importance of prepping the floor cannot be over-emphasized. Follow the following steps to prepare your floor:

  • Clear all the furniture and remove wall or cabinet floor molding.
  • If you have old peel-and-stick planks installed, remove them.
  • Clean the floor thoroughly with the help of a vacuum cleaner. You can even wash and dry the floor.
  • Smooth out the surface by removing any nail heads or debris, leveling the bumps, and filling in the holes. If using a material like Fixall to fill the holes, leave it to dry for 24 hours.

Floor Plan

The second step is laying out the floor pattern.

  • The dimensions of the floor should be measured with a measuring tape. Mark a line straight from the middle point of the longest wall.
  • Mark another line from the middle point of the shortest wall such that both the lines meet in the middle.
  • Your room will be divided into four parts or quadrants. These lines will serve as a guide for laying down the planks.
  • The edges of walls and cabinets are not ideal reference points because they might not be exactly straight.

Dry Run

Before the final showdown, it’s best to check that you have enough planks to line the entire floor. Without peeling off the protective layer, lay down the planks along the lines, starting from the center point all the way to the walls. Make sure to not cut the planks too short, as it can affect their ability to stick. You will get a clear picture of what to expect with the final result after this dry run.

Peel and Stick

It’s time for installation!

  • Line up the planks along the layout lines, peel off the paper covering, and press the plank carefully into the position.
  • In the same manner, lay the first line of planks. In case of any mistake, quickly peel off and repress the plank in the correct position.
  • Press each plank firmly to remove any air bubbles trapped underneath.
  • Clean the excess glue that flows out of the joints and edges.
  • First stick all the vinyl planks that do not require cutting in the center of the floor.
  • When cutting a plank, hold the plank against the wall, measure and mark, and then cut from the back using a utility knife. Remove the paper covering after the plank is cut.
  • The vinyl can be trimmed with the help of a pair of scissors as well.
  • Once sure than the piece fits perfectly, peel and stick the plank.
  • Continue the same steps to complete the floor.

This was the easy DIY installation guide for peel and stick vinyl plank flooring! Try it to give a new look to your house instantly!

Sharing is caring!